About Us

繁體中文

　home

　about us

　news

Model: MSDP-883

electronic meters/control devices

Digit PowerMeter

MSDP-800

MSDP-300

MSDP-880/ 882

Demand Control

MSDM-900

V and A Meter

MSDP-883

Kilowatt-Hour Meter

MSDP-700/702

PF Regulator

MSPFR-806/ 812

APFR-6

Power Converter

MSDP-200

Introduction:

signal Converter

MSDP883 is the leading electric meter, which is entering into a new era of digitalization and which will meet the requirements of a new generation of users. Having a high degree of application flexibility, including features of clearness and easy reading, the easy multifunctional operation and the added value of upgrading the performance of the entire system, it fully shows the advantages of digitalization as a future trend.

Signal Transducer

AC Welding Anti-Shock Device

MSES-500

power control system

Power Control System

Demand Control System

Features:

Power Factor Controller

◇Simultaneously display 3-phase voltage and 3-phase current：
Collectively display data via a large LED without the selection of the traditional VS ＜voltage switch＞, AS＜current switch＞, and △ or Y voltage via the front panel and single-key select.

◇Various protective functions：
They include Phase-lack protection, over-current protection, over-voltage protection and under-voltage protection. There are two relay outputs, a contact a or b output, and an on/off relay delay, which can be set from 0- 999 seconds.

◇Simple and easy installation：
CT/PT value, protective functions, etc. are set directly from the front panel ; after setup, they cannot be changed except via a certain procedure so as to avoid non-technical personnel from changing them erroneously.

◇To save working time：
With its simple wiring, short work time , there is no need for the addition of the traditional VS ＜voltage switch＞, AS＜current switch＞.

◇Applicable to any system：
Current range : 0- 6,000A; voltage range: 0- 510 V/KV; three-phase three-wire、three-phase four-wire systems are suitable. It may also help to decrease stock and facilitate management.

plating machines/accessories

Specifications:

ITEM	DESCRIPTION
Power Source	110V，220V，380V，440V ±10% ＜15VA Max.＞frequency range: 50-60HZ
Input Current	0-5A ＜CT ratio input＞，display range: 0-6000A
Input Voltage	0-510V ＜PT ratio input＞，display range: 0-999V/KV
Output Contact	2-contact output，capacity: AC220V/DC30V 5A，mechanical life: 20 million times
Tolerance	Temperature:-10~ 60℃，humidity: 0~ 90%
Dimension	Exterior: 144X144mm，Panel cut out: 138X138mm，depth: 108.5mm ＜including terminal＞DIN 43 700
Accuracy	Volt meter: ± 0.2%F. S. ，Ampere meter: ± 0.2% F. S.

Models Menu:

System	MSDP-883	MSDP-883-1	MSDP-883-2	MSDP-883-M
Three-phase voltage	○	○	○	○
Three-phase current	○	○	○	○
H / L set the alarm output	○			○
Three-phase current maximum records			○
Communication Interface				○


		Minsun Technology Co., Ltd
		15, Lane 210, Jeanshin St. Shulin City, Taipei Hsien, Taiwan R.O.C

		Tel : 886-2-2689-4051~2
		Fax: 886-2-2688-0109
		91,GUNGMINGNAN 1 RD., TAINAN, TAIWAN, R.O.C.
		Tel : 886-6-246-4745~6
		Fax: 886-6-246-4750
		E-mail:minsunt@gmail.com
		http://www.minsun.com